Semiconductor Design House · Shenzhen

We design the board
before it is built

Hardware design for automotive, industrial motor drive and power electronics. From requirement definition and device selection to schematics, BOM, firmware, bring-up and validation reports — one package, ready for pilot production.

Founded2022 · Futian, Shenzhen
Focus3 solution lines
Responsewithin 48 hours
3solution lines
6application areas
48hresponse time
10+ yrscore team experience
What we design

Three lines, all built to be manufactured

We organise work by the product you are building, not by brand catalogue. Each line has a reference architecture, a device platform list and a validation checklist.

Automotive

Automotive electronics

In-vehicle power, lamp drivers, CAN/LIN transceivers and sensor interfaces. AEC-Q100 based selection, automotive-grade alternates and derating.

PowerLightingCAN · LIN
Industrial

Motor drive & industrial control

Inverters, servo and BLDC drives: gate drive, current sensing, isolated supply, protection and thermal design across the power and control chain.

InverterServoBLDC
Power

Power & new energy

AC-DC, DC-DC, PFC/LLC topologies with BMS sensing, isolation and protection chains.

AC-DCPFC · LLCBMS

BOM supply for design projects

For signed projects we supply the BOM we designed — alternates confirmed, pilot-run and ramp-up quantities included, same engineers and same change log as the design.

Ask about supply →
How we work

Four stages, clear outputs

Every stage has a defined input, output and review gate. You always know where the project stands.

Requirements

Inputs, outputs, environment, compliance and cost target fixed in a reviewable spec.

Architecture

Block diagram, device platform trade-off, alternates and derating calculated before layout.

Design delivery

Schematic, BOM, firmware and production test points, reviewed for manufacturability.

Bring-up & validation

Debug, thermal and EMC pre-scan, test report and corrective actions, pilot support.

About

Shenzhen Xinguowei Technology Co., Ltd.

Founded in 2022 and based in SEG Science & Technology Park, Futian District, Shenzhen, XGWCHIP is a hardware design house. We work with customers in automotive, industrial motor drive and power electronics.

Our engagement starts at requirement definition and ends with a design package that a production line can use: schematic, BOM, firmware, test report and pilot support. The core team brings more than ten years of semiconductor and hardware design experience.

  • Solution design & validation — architecture, schematic, BOM, firmware, test
  • Device selection & alternates — platform trade-off, derating, verification
  • Prototype and pilot support — bring-up, corrective actions, line issues

Company facts

Legal nameShenzhen Xinguowei Technology Co., Ltd.
Founded2022
LocationFutian District, Shenzhen, China
BusinessHardware design & validation
FocusAutomotive · Motor drive · Power
Websitexgwchip.com
Contact

Talk to an engineer

Send a BOM, a schematic or a waveform. We usually reply within 48 hours.

  • Address Room C11, 6/F, East Block, Building 4,
    SEG Science & Technology Park, 3012 Huaqiang North Road,
    Futian District, Shenzhen, China
  • Phone+86 755 2826 0769
  • Emailxinguowei@xgwchip.com
  • HoursMon–Fri, 09:00–18:00 (GMT+8)

What to send

  • Target product and end application
  • Input / output specifications and environment
  • Compliance or qualification requirements
  • Cost target and project stage
  • Existing schematic or BOM, if any

NDA available on request.